Patrol

Your camera may be positioned to view a large space (like a barn), but you might only want to patrol a specific area (the entrance). You can specify the patrol zone.

This feature is only available on some cameras.

To turn on Patrol:

Before you turn on the Patrol, you need to set up more than 2 sites firstly, 6 sites can be added at most.

1. Please open the app, tap on your Camera

2. Tap Site

3. The camera is facing the area you want to patrol without turning, enter the site name and confirm

4. Tap the Direction, press the upper direction to turn to the second place you want to patrol, back to the site, enter the second site name, and confirm

5. Back to the Features

6. Tap the Patrol icon, then turn on Enable Patrol

7. You can choose to All-day-Patrol or schedule as your needs.

Additional Notes:

Patrol and Motion Detection work together can detect motion in a specific area.

• Related Articles

• My camera is moving without command

  If your camera is moving without your command, follow these troubleshooting steps to investigate and potentially resolve the issue: 1. Check Network Connection: Poor network connections may cause the camera to self-check and rotate when reconnecting ...

• Motion Tracking

  Cam W1/Smart camera can follow motion automatically. Using the pan and tilt features, whenever motion is detected, the camera can move to track the motion until the motion stops. This feature is only available on some cameras. To turn on Motion ...